Handheld Potentiostat/Galvanostat, Electrochemical Analyzer (MedPstat 2.0)

  • Handheld Affordable & Potentiostat/Galvanostat,
  • Applied Potential Range: ± 4.8 V,
  • Max Current Range: 100 mA,
  • Measured Potential Range (Gal): ±7.5 V,
  • USB Communication,
  • Software for PC Data acquisition & plotting.

Additional information

MedPstat 2.0 is a Handheld Affordable & Precision Potentiostat/Galvanostat, with a wide range of ±2.4 V, 100 mA. Optimum for electrochemistry learning & research applications. Comes with high-quality dummy cells for learning & calibration applications, Software for PC, Data acquisition & plotting.

Detailed Specifications:

  • Electrochemical Methods: CV, LSV, ChronoAmp, OCP, DPV, SWV, ChronoPot, Charge-Discharge,
  • Channels Per Unit: 1,
  • Applied potential range: ± 4.8 V,
  • Applied Potential Accuracy: 0.1% of the setpoint, 1mV Max,
  • Applied Potential Resolution: 152 µV,
  • Measured Potential Accuracy: 0.1% of the setpoint, 1mV Max,
  • Measured Potential Resolution: 156 µV,
  • Applied Current Resolution (Gal) 1.5 pA,
  • Measured Potential Range (Gal) ±7.5 V,
  • Compliance Voltage: ±8 V,
  • Maximum Current: 100 mA,
  • Current ranges: 7 Ranges,
  • Measured Current Accuracy: 0.1% of the range, 1nA max,
  • Measured Current Resolution: 0.00015% of range, 1.5 pA,
  • Input Impedance: < 10 TΩ,
  • Input Bias Current: 1pA Max,
  • Computer Interface: USB,
  • Channel Cable Length: 0.8 meter,
  • power supply: 12V DC,
  • Power Supply Requirements: 100V – 240V AC,
  • Weight: 285 grams,
  • Physical Dimensions: 181mm * 91.5mm * 42mm,
  • Operating temperature range: 0 to 50°C,
  • Communication: USB,
  • Bandwidth: up to 4 MHz,
  • Max. data acquisition rate: 1 KHz,
  • ADC/DAC Resolution: 16 bit,
  • Slew Rate (No Load): 3.5 V/µS,
  • Maximum ADC Sampling Speed: 5,00,000 samples/sec.

Software

MedPstat comes with a free, lifetime, licensed version of MedEplot data acquisition & plotting software. It is compatible with any PC or laptop with Windows OS.

Simple User Interface

Light Weight Software

Live Data View

Save Data in CSV

Open / Overlay Plot

Windows / IOs

Here’s what’s inside the MedPStat 2.0 package – everything you need for your research!

The Most Versatile  Potentiostat/Galvanostat Package includes:

  • Electrode Cable (1 Piece),
  • Mini Dummy Cell (1 piece),
  • Power Adaptor (1 piece),
  • USB C Cable (1 piece),
  • Pen Drive with Software (1 piece),
  • Warranty: 1 Year.

Video Tutorial

FAQs

Unable to connect MedPstat with Software?

Here’s how you can fix that! 

First, check the USB-C type cable to ensure it is properly connected. Then, go to the PC settings and open the Control Panel. Navigate to “Ports (COM & LPT)” and check if the USB drive is recognized.

If it is not showing up or is listed under “Other Devices” as FT232R USB UART, try to install the appropriate driver provided in the Pen drive along with the instrument.

What is a dummy test cell provided with MedPstat?

The dummy cell provided with MedPstat is used for calibrating instruments and checking the current ranges.

So, we provide a 1K resistor, which allows for easy testing of the instruments. If you encounter any issues or have doubts about the readings, simply connect the instrument to the dummy cell and run one Linear Sweep Voltammetry (LSV) from -1 to 1 V. In the result plot window, observe that the current range is displayed from -1 mA to 1 mA.

What is the power requirement for MedPstat?

The MedPstat requires a power supply of 100V – 240V AC, 50/60 Hz. We provide a high-standard power supply compatible with American, Australian, UK, and European/Indian connections for universal use (You can choose any of them).

The power cable is 1.5 meters long for easy connectivity. On the backside panel of the MedPstat cabinet, you will find a port labeled 12V 1A (DC) for the power supply connection.